Vertical water outlet is a traditional water outlet method When purchasing this type of faucet, attention should be paid to the length of the faucet noise Assuming that it is too short, it may be due to the hand to touch the edge of the washbasin during grooving
Oblique water outlet referrs to the outward objective spraying of the water outlet, which can save space and use a shorter noise to spray water into the middle of the pool How, this type of noise may flow vertically downwards when the water pressure is low or when the water flow is turned off, which can still cause the hand to touch the edge of the basin
Rotating the water outlet allows the faucet to rotate 360 °, making it conservative for cleaning the face, etc. However, rotating the faucet may cause the lower outlet to be too short (otherwise when spraying rewards, it will spray out of the basin), which can affect the normal toilet washing Assuming the basin is too small, it is not recommended to use this faucet
The withdrawable water outlet is connected to the faucet through a hose and is usually embedded in the faucet. It can be pulled out and used when needed. The benefit is the freedom to let the faucet flow in any direction, but it is necessary to spare one hand to catch the faucet when pulling it out.
The wide mouth outlet indicates that the water outlet is flat, and when it flows out, the water flows in a waterfall shape. Sometimes, a piece of glass supports the outlet, forming the effect of a water curtain. The characteristic of this type of faucet is its beauty and characteristics, but in terms of washing effect, the water flow is small and dispersed, which is not as good as traditional water outlet methods.
It can be divided into spiral type, wrench type, lifting type, and induction type faucets.
When the spiral handle is opened, it needs to rotate many turns; The wrench handle usually needs to rotate 90 degrees.;
The lifting handle only needs to be lifted upwards to release water; The sensing faucet only needs to reach under the faucet to automatically discharge water.
Additionally, there is a type of delayed closure faucet. After turning off the switch, the water will flow for a few more seconds before stopping, so that the dirt on your hands can be washed clean again when turning off the faucet.
Article source: Kaiping stainless steel faucet http://www.yishangshijue.cn/
07-02
Stainless steel faucet manufacturer: How to prevent kitchen faucet leakage?
In our daily life, there are many items that may age after being used for a period of time During this time, leakage from the kitchen faucet is a common phenomenon If this problem occurs, how should w
02-20
Analysis of the development advancements of stainless steel faucet manufacturers
① - Simpler managementCompared to kitchen and bathroom equipment made of other materials, stainless steel faucets are more simple to clean and manage Stainless steel materials have stable functions an
01-15
The manufacturer of stainless steel faucets information how to determine their authenticity
Stainless steel raw materials are soft, while leading zinc alloy raw materials are hard and brightTake the thing to a spectroscopic instrument for chemical analysis (Most accurate) 2 Apply acid and al
01-08
How to handle the leakage of Kaiping stainless steel faucet better
1. To repair the leak of a stainless steel faucet, the first step is to turn off the main valve of the water pipe at home Prepare the screendriver and wrench2. There is no water leakage at the outlet